Identifying unknown tags using the ChameleonMini Rev.G

January 06, 2017

Step by step instructions for reading unknown HF Tags (13.56 MHz) with the ChameleonMini Rev.G.

What you will need:

Take a look at the Getting Started Guide if you need help with the setup process.

1. Connect up your ChameleonMini and start the client.

CMini Rev.G Hookup

2. Enter the command below to configure the ChameleonMini as a reader. 

Config=ISO14443A_READER

Output:

100:OK=ISO14443A_READER

3. Place the tag under ChameleonMini. Run the identify command.

IDENTIFY

Output:

101:OK WITH TEXT
MIFARE Ultralight
ATQA:   4400
UID:    041891EA453181
SAK:    00
101:OK WITH TEXT
MIFARE Classic 1k
ATQA:   0400
UID:    5C9F9F0D
SAK:    08
101:OK WITH TEXT
MIFARE Classic 4k
ATQA:   0200
UID:    FE333A53
SAK:    18
101:OK WITH TEXT
MIFARE DESFire EV1
ATQA:   4403
UID:    04113B624D3C80
SAK:    20





Also in Blog

Getting Started with Version 3.0.1 of the Proxmark3
Getting Started with Version 3.0.1 of the Proxmark3

November 06, 2017

This guide covers how to get started with the Proxmark3 firmware V3.0.1 on Windows, Linux and macOS.

View full article →

Getting Started with ChameleonMini Rev.G
Getting Started with ChameleonMini Rev.G

October 23, 2017

Follow this guide to get started with your new ChameleonMini Rev.G using macOS, Windows and Linux.

View full article →

How to Install a Proxmark3 Driver on Windows 10
How to Install a Proxmark3 Driver on Windows 10

October 18, 2017

Follow the instructions below to install the Proxmark3 CDC drivers on a computer running Windows 10.

View full article →