ProxmarkPro - How to Replay a Mifare Ultralight Tag

July 23, 2019

This blog post covers the steps to replay a Mifare Ultralight tag with a ProxmarkPro.

For this blog post you will need the following:

1. Turn on your ProxmarkPro and connect the Low Frequency Antenna.

2. Navigate to the Mifare Ultralight menu in unchained mode.

Mifare Menu GIF

3. In the Mifare Ultralight menu select Read while the tag is in field. Once read the Mifare Ultralight tag will be saved to memory. Click the right button to continue back to the Mifare Ultralight menu.

Mifare Reading GIF

4. Now that the tag has been read, navigate and select the Replay option in the Mifare Ultralight menu, your tag will now be replaying.

Replaying Mifare Ultralight

5. Place the antenna over your reader. If successful you Mifare Ultralight should now be read by your reader. 






Also in Blog

ProxmarkPro - General Tag Operations - Getting Started
ProxmarkPro - General Tag Operations - Getting Started

October 15, 2019

This blog post covers operations you can do with tags in Unchained Mode with the ProxmarkPro.

View full article →

ProxmarkPro - Unchained Mode - Getting Started
ProxmarkPro - Unchained Mode - Getting Started

October 15, 2019

Unchained mode is a user friendly on-screen menu to perform various tag operations. This blog post covers the main menus of these operations.

View full article →

ProxmarkPro - Client Setup - Getting Started
ProxmarkPro - Client Setup - Getting Started

October 15, 2019

Follow this guide to learn how to setup the client with the ProxmarkPro. The client is a way to communicate over USB with the ProxmarkPro, you can issue commands and the ProxmarkPro will output the results. The client is accessed through a terminal or command prompt.

View full article →

We use cookies to ensure that we give you the best experience on our website. If you continue we'll assume that you are understand this. Learn more
Accept