ProxmarkPro - Identifying Unknown Tags

April 02, 2019

This blog post covers the steps of how to determine an Unknown card with a ProxmarkPro. For this post we will be using a HID and Mifare Ultralight tag as our examples.

What you will need:

  • ProxmarkPro
  • HID Tag (Unknown LF Tag)
  • Mifare Ultralight (Unknown HF Tag)

If you know what type (Low/High Frequency) of tag you are working with connect the corresponding antenna.

Low Frequency

1. In this example we will be using a Low Frequency Antenna.

2. With your LF Antenna connected navigate to the LF menu.

3. With your tag in field select the Identify option. The HID tag will be identified and displayed on the LCD with the UID.

Note: From here you can Save, Clone, or Replay the HID tag. You can also use this command for other LF Tags such as a EM4100 tag.

High Frequency

1. In this example we will be using a High Frequency Antenna.

2. With your HF Antenna connected navigate to the HF menu.

3. With your tag in field select the Identify option. The Mifare Ultralight tag will be identified and displayed on the LCD with the UID.

Note: From here you can Save or Replay the Mifare Ultralight tag. You can also use this command for other HF Tags such as Mifare 1K and 4K.






Also in Blog

ProxmarkPro - General Tag Operations - Getting Started
ProxmarkPro - General Tag Operations - Getting Started

October 15, 2019

This blog post covers operations you can do with tags in Unchained Mode with the ProxmarkPro.

View full article →

ProxmarkPro - Unchained Mode - Getting Started
ProxmarkPro - Unchained Mode - Getting Started

October 15, 2019

Unchained mode is a user friendly on-screen menu to perform various tag operations. This blog post covers the main menus of these operations.

View full article →

ProxmarkPro - Client Setup - Getting Started
ProxmarkPro - Client Setup - Getting Started

October 15, 2019

Follow this guide to learn how to setup the client with the ProxmarkPro. The client is a way to communicate over USB with the ProxmarkPro, you can issue commands and the ProxmarkPro will output the results. The client is accessed through a terminal or command prompt.

View full article →

We use cookies to ensure that we give you the best experience on our website. If you continue we'll assume that you are understand this. Learn more
Accept